Known issues on the Kaboard

Version 1.0

TXD and RXD lines from ft232r to AVR are not crosslinked. Correct is : ft232r TXD -> AVR RXD, ft232r RXD -> AVR TXD

Solution : Cut the tracks and use some wire or 0 Ohm resistors to fix it

Fixed in 1.1
Reset is directly connected to the dtr pin on the ft232. When programming the AVR via the isp header, the porgrammer is unable to pull reset low for this reason. Also when progamming via usb with avrdude dtr will stay low to long time the bootloader won't start in time.

Solution : Cut the track on the backside of the board and insert a 100nf capacitor.

Fixed in 1.1