Updated documentation

README.md

@@ -30,6 +30,22 @@ I decided to stick with the ft232rl for 2 reasons :
    Also I learned the hard way with my steallaris launchpad, that a usb can be a real pain in the ass when it comes to debugging it.
 
 
+Where can I get a Kaboard ?
+---------------------------
+Right now I don't sell Kaboards anywhere and the bug free 1.1 version has not been produced yet.
+So what I can offer you is a unpopulated 1.0 board with some minor bugs.
+So if you got a cool project and the kaboard is just the board you need,
+write an email to kaboard@sebastians-site.de, 
+explain your project and I might send you a unpopulated pcb for free.
+
+
+Known Issues
+------------
+You just got a unpopulated Kaboard and want to know what bugs you might encounter ?
+Check known_issues.md to see what issues you need to fix and how I usually fix them.
+Also if you think you have found a new bug write me a short mail : kaboard@sebastians-site.de 
+
+
 What the !/%§)"" does KaBoard mean ?
 ------------------------------------
 The name is actually inteded to be pun for german readers.

known_issues.md

@@ -6,7 +6,8 @@ Version 1.0
  * TXD and RXD lines from ft232r to AVR are not crosslinked.
     Correct is : ft232r TXD -> AVR RXD, ft232r RXD -> AVR TXD
     
-    Solution : Cut the tracks and use some wire or 0 Ohm resistors to fix it 
+    Solution : Cut the tracks and use some wire or 0 Ohm resistors to fix it.
+                See photos/txd_rxd_1_0_fix.jpg for details. 
 
     Fixed in 1.1
 
@@ -17,11 +18,13 @@ Version 1.0
     to long time the bootloader won't start in time. 
     
     Solution : Cut the track on the backside of the board 
-                and insert a 100nf capacitor.
+                and insert a 100nf capacitor. 
+                See photos/reset_1_0_fix.jpg for details.
 
     Fixed in 1.1
 
-* Jumper settings table on back side is totally messed up.
+ * Jumper settings table on back side is totally messed up.
+
     Correct table : USB: JP2 open and JP3 short, 
                     Selfpowered : JP2 short and JP3 open
 
@@ -29,6 +32,7 @@ Version 1.0
 
     Fixed in 1.1.
 
+
 Version 1.1
 -----------
  * None found yet